American Tackle: rod guides, reel seats and grips

American Tackle, a brand based in Oviedo, Florida, designs rod guides, reel seats and grips for rod building. Rodhouse carries its MicroWave, Vortex Air, Ring Lock and G2 series.

2012
Launch of the MicroWave guide system
Oviedo, Florida
Brand headquarters in the USA
Ring Lock
Patented guide design with a pressed ring

The story of the brand

From Florida to MicroWave, the guide rethought

American Tackle Company International is based in Oviedo, Florida. The brand designs rod components: guides, reel seats, grips and blanks. Production is handled by independent partner factories in the United States and Asia.

In 2012, American Tackle unveiled the MicroWave system at the ICAST show in Orlando. Doug Hannon, a bass angler known as The Bass Professor, came up with it and developed it with the brand. This patented guide system is built for better line control. American Tackle also owns the patented Ring Lock design, and its Nanolite guides use a zirconium based ceramic.

In 2023, the G2 Tsuka 2 carbon handle won Best of Show at ICAST. The same year, Foundation Outdoor Group acquired American Tackle and Mud Hole. Rodhouse now offers its guides, G2 reel seats and grips for saltwater, freshwater, carp and fly fishing.

Our American Tackle articles

Key dates

SKU AULHTR16-S
Brand American Tackle
Material Aluminum
Weight (g) 0.46
ID1 (mm) 21.3
OD1 24.9

ULH HOOD

3,40€
TLS CCT Spinning Reel Seat
SKU TLS16-PK
Brand American Tackle
Material Graphite
Weight (g) 18.0
Length (mm) 123.19
Mounting Spinning
ID1 (mm) 15.24
OD1 18.03

TLS CCT Spinning Reel Seat

(1)
21,90€
SKU MFLEX-GOLD
Brand American Tackle
Weight (g) 3.8

MicroFlex Abalone Shell Inlay Strips

(2)
16,80€
SKU CPRWC-14-B
Brand American Tackle
Material Thermoplastic
Weight (g) 0.28
ID1 (mm) 14.0
OD1 19.5

Rear Winding Check

1,10€
SKU CRSD-PTRFH-15-B
Brand American Tackle
Material Thermoplastic
Weight (g) 0.87
ID1 (mm) 15.0
OD1 18.0

Trim Ring For Full Handle

1,10€
SKU CADBC-S-MG
Brand American Tackle
Material Aluminum
Weight (g) 4.7
Mounting Carp
OD1 16.0

Carp Domed Butt Cap

3,40€
SKU FRTL-4
Brand American Tackle
Weight (g) 0.2
Length (mm) 18.55
Mounting Fly fishing
ID1 (mm) 8.5
OD1 10.0
Ceramic Without ceramic
Frame Chrome
L1 13.05 mm
IT1 1.6 mm
Height 10.69 mm

Large Loop Fly Tops

(1)
1,60€
SKU DAGGER-EVA
Brand American Tackle
Material EVA
Weight (g) 4.5
Length (mm) 16.0
Mounting Spinning
ID1 (mm) 8.64
OD1 18.0
Grip type Rear grip

Grip for Dagger

3,84€
SKU NBRLC-8
Brand American Tackle
Weight (g) 0.49
Length (mm) 18.51
Mounting Casting, Fly fishing
OD1 8.0
Ceramic Nanolite
Frame Black
Fixing Double leg
L1 5.02 mm
Height 11.86 mm

Ring Lock Nanolite

3,30€
SKU SPG35A - 08B
Brand American Tackle
Material EVA
Weight (g) 8.2
Length (mm) 92.0
Mounting Casting, Spinning
ID1 (mm) 12.8
OD1 27.45
Grip type Rear grip

SPG35A

2,40€
Clearance
Vortex Air Spinning Guides clearance rodhouseVortex Air Spinning Guides
SKU VABBSF-10
Brand American Tackle
Weight (g) 0.53
Length (mm) 18.6
Mounting Carp
OD1 10.0
Ceramic Without ceramic
Fixing Single leg
L1 10.2 mm
Height 17.6 mm

Vortex Air Spinning Guides

1,20€0,32€
SKU CRSD18B-1K
Brand American Tackle
Material Carbon
Weight (g) 43.0
Length (mm) 125.45
Category Carp fishing
Mounting Spinning, Carp
ID1 (mm) 17.0
OD1 25.0
OD2 20.15

CRSD-K

26,20€

Sort by

Sort by

Frequently Asked Questions

Everything about the brand

Where are American Tackle components made?

American Tackle Company International is based in Oviedo, Florida. The brand designs its guides, reel seats and grips.

Production is handled by independent partner factories located in the United States and Asia. American Tackle does not state the factory for each item.