Carbon Rear Grip TCH Skeleton Casting

Carbon rear grip by Rodbuilders' Republic, designed for Fuji TCH Skeleton casting reel seats in size 13. It extends the reel seat towards the back, with a very clean finish. The result: a comfortable, light and technical casting build.

A rear grip built for casting

At 90 mm long, this rear grip gives you real grip length behind the reel seat. Yet it weighs only 8.5 g. On the reel seat side, its 25 mm outside diameter gives a clean transition with the TCH Skeleton casting 13. It widens slightly to 26 mm at the other end. With a Skeleton reel seat, the blank stays in contact with your hand. Every bite travels up to your fingers.

Specifications

• Brand: Rodbuilders' Republic
• Material: carbon
• Compatibility: Fuji TCH Skeleton casting, size 13
• Length: 90 mm
• Outside Ø: 25 mm on the reel seat side, 26 mm at the other end
• Inside Ø: 6.5 mm
• Weight: 8.5 g

Need a shorter rear grip?

Looking for a more compact rear grip? The TCH Skeleton spinning rear grip in size 15 (straight shape) also fits a TCH Skeleton casting size 13 reel seat. It is 40 mm long, weighs 3.7 g and has a 25 mm outside diameter on the reel seat side. A good option for a short rod or an even lighter build.

Assembly

The inside diameter is 6.5 mm. Measure your blank where the grip will sit. If it is thicker, ream the grip. If it is thinner, fill the gap with shims. Then glue with epoxy. For a consistent set-up, pair this grip with the Fuji TCH Skeleton casting reel seat in size 13.