The beauty with golden eyebrows

A magnificent and extremely wary sparid that is much appreciated by anglers for its fights but also for its meat... Its distrust forces us to question ourselves constantly and to use good quality equipment to put all the chances on our side. Start configuration

Matching blanks

There are several techniques for fishing Gilthead bream by boat. The two main ones are tenya andsliding assemblies. For Tenya fishing, any lure rod with a minimum power of 10-30gr will do the job, but ideally with a soft tip to avoid arousing the distrust of this sparid. Longer rods, between 7.6'' (2m28) and 8'' (2m43), are used for sliding Assembly fishing. This makes it easier to cast assemblies, which are often long, and to have good reach when hooking, as this sparid has a particularly hard jaw. They are also more powerful, as the average sinker used for this technique is around 70gr. Of course, the lead depends on the fishing area. That's why we've chosen 2 different blanks. Please note, however, that when you cast this Assembly, you don't whip as you would with a lure, so the power range may be slightly exceeded.

  1. Snapper Neast 84VS:2m13, 30-130g: Sold under the Rodbuilders' republic brand, this One-piece blank was developed by North Fork Composites specifically for Tenya sparid fishing to our specifications. Its length of 2m13 is perfectly adapted to the vertical/diagonal fishing practised from a boat and allows you to fish for hours without tiring. Carbon Blank on IM base.
  2. NFC MB 765-1 X-Ray Neo :2m29, 20-60g: A new hybrid blank. It features X-Ray carbon technology but benefits from a Zentron fibreglass tip. This tip gives flexibility and therefore helps to deceive dorados. Don't be afraid to throw sinkers over 60gr. If you don't whip, you can exceed the power range without any problem.
  3. NFC MB 809 HM :2m43 30-80g: A powerful blank, capable of casting weights up to 120gr (without whipping). Its power reserve is monstrous and will allow you to bridle a beautiful fish even if it leaves in a current vein. The high modulus carbon provides maximum information. The hardest part will be differentiating between the lead rolling along the bottom and the fish's discreet bites.
Snapper Beast 84VS Snapper Beast 84VS
192,50€

En stock

Lightweight

Resonance

Power reserve

Progressiveness

Choose this blank
MB 765-1 (X-RAY NEO) MB 765-1 (X-RAY NEO)
275,00€

En stock

Lightweight

Resonance

Power reserve

Progressiveness

Choose this blank
MB 809-1 HM MB 809-1 HM
295,90€

En stock

Lightweight

Resonance

Power reserve

Progressiveness

Choose this blank

Our recommended handles

We have selected 3 handle kits consisting ofFuji IPS 16 reel seat. The MB 809 HM blank has a strong connicity. The reel seat comes to a stop and allows you to make a handle with a reel foot at 38.5cm. This is a very good length for a strong rod. If you want to make a short handle with this blank, you'll need a size 17 reel seat. Please let us know the desired length between butt and reel foot so that we can adjust the bushings. You can also ask us to change the color of the handle kit rings (while stocks last).

Handle Kit IPS16 Split Grip Dark Emperor / Carbon Soft Touch / Gloss Black Handle Kit IPS16 Split Grip Dark Emperor / Carbon Soft Touch / Gloss Black
88,91€

Out of stock

  • Marque(s) : North Fork Composites, Rodbuilders' Republic, Fuji
  • Matière(s) : Carbone, Graphite, Polymer, Aluminium
Out of stock
Handle Kit IPS16 Split Grip Graphite / Liège/Cork / Gold Handle Kit IPS16 Split Grip Graphite / Liège/Cork / Gold
61,61€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : Liège, Aluminium, Graphite, Polymer
Choose this handle
Handle Kit IPS16 Split Grip Graphite / EVA / Silver Handle Kit IPS16 Split Grip Graphite / EVA / Silver
41,53€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : EVA, Aluminium, Polymer, Graphite
Choose this handle
Full Handle Kit IPS16 Dark Emperor / Carbon / Gloss Black Full Handle Kit IPS16 Dark Emperor / Carbon / Gloss Black
91,15€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : Aluminium, Carbone, Graphite, Polymer
Choose this handle
Full Handle Kit IPS16 Graphite / Liège/Cork / Gold Full Handle Kit IPS16 Graphite / Liège/Cork / Gold
53,20€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : Liège, Aluminium, Polymer, Graphite
Choose this handle
Full Handle Kit IPS16 Graphite / EVA / Silver Full Handle Kit IPS16 Graphite / EVA / Silver
38,50€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : Aluminium, EVA, Polymer, Graphite
Choose this handle
Full Handle Kit IPS16 Dark Emperor / Carbon / Gloss Black Full Handle Kit IPS16 Dark Emperor / Carbon / Gloss Black
91,15€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : Aluminium, Carbone, Graphite, Polymer
Choose this handle
Full Handle Kit IPS16 Graphite / Liège/Cork / Gold Full Handle Kit IPS16 Graphite / Liège/Cork / Gold
53,20€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : Liège, Aluminium, Polymer, Graphite
Choose this handle
Full Handle Kit IPS16 Graphite / EVA / Silver Full Handle Kit IPS16 Graphite / EVA / Silver
38,50€

En stock

  • Marque(s) : Rodbuilders' Republic, Fuji
  • Matière(s) : Aluminium, EVA, Polymer, Graphite
Choose this handle

Compatible guides

Even if we don't need to cast far, Guides play an important role in this type of fishing. Sturdiness, resonance and above all corrosion resistance are the criteria to be taken into account. We offer 3Guide packs Fuji of different finishes, corresponding to different budgets and frequencies of use. The first segment of the range is occupied by theAlconite ceramic rings and stainless steel frameThey offer excellent value for money and are ideal for occasional use. The frame of these Guides is made of Inox with an anti-corrosion coating. The Alconite ceramic provides good glide and a high heat dissipation rate for the braid, but take care not to spool dry fly braid onto these guides. The second level of the range is occupied by theGuides with Inox and SIC ceramic frameworks. In this Guide range, the frame is still made of coated stainless steel, but the ceramic is made of Fuji SIC, which offers better glide and greater resistance. Finally, Fuji's top-of-the-range range is represented by theTitanium-Torzite Guides. The Titanium frame is much lighter and, above all, totally insensitive to corrosion. The ceramic is made of Torzite, another Fuji proprietary material that enables the braid to glide perfectly over the ceramic. This ultra-high-performance ceramic requires less material, so smaller tunnel guides can be used. Less weight = greater sensitivity and performance.

Summary of your configuration

Here are the details of the items to add to your basket for the following configuration: Gilthead bream by boat

Element Product name Price
Total
NB : La configuration suivante n'est pas une canne déjà montée. Il s'agit de l'ensemble des éléments vous permettant de vous construire votre canne à pêche.